In: new york city building
We have covered the heating requirements in multi-family buildings (link here) in the past, but what do we know about the required hot water temperature within an apartment that is located in the New York City area? That’s pretty easy, so long as you know the law.
WHO DOES THE LAW APPLY TO? Under New York State law, the law applies to all owners of buildings with three (3) or more apartments that are built after April 18, 1929, and before January 1, 1951 that are three (3) stories or more in height AND all owners of buildings with three (3) or more units that are built after January 1, 1951.
Under a more specific New York City hot water law, the law applies to all owners of buildings with three (3) or more units built before April 18, 1929, all owners of buildings with three (3) or more units built after April 18, 1929 and before January 1, 1951 that have fewer than three (3) stories AND all owners of tenant-occupied 1 or 2-family dwellings in NYC.
WHAT DOES THE LAW REQUIRE? The New York State hot water law requires that all residents in a building that falls under the jurisdiction be given hot water that is at least 120 degrees Fahrenheit in every shower, bath and sink, 24-hours per day. Building owners in New York City must provide hot water that is at least 120 Fahrenheit in every shower, bath and sink between 6am – Midnight, every day of the year.
NEW YORK CITY LAW ONLY: Owners that fall within the NYC hot water law must install an anti-scald feature on any valve that controls the water supply to bathtubs and showers when renovating the water supply in the bathroom or when installing a new bathroom. An anti-scald feature will prevent the temperature from reaching above 120 degrees Fahrenheit, to prevent burns. If an anti-scald device is used, the minimum temperature that it can have water coming out is 110 degrees Fahrenheit.
WHAT FINES CAN MY BUILDING BE SUBJECT TO FOR NOT PROVIDING HOT WATER? Should your building fail to provide adequate hot water to residents as prescribed by State law, the building owner may be fined $500 and/or imprisoned for up to 30 days, per offense. Owners who violate the City hot water law could be fined between $250 – $500 for a 1st violation and between $500 – $1,000 per day for each violation that occurs during the same year. If renovating a bathroom or installing a new bathroom, the fine for not installing a proper anti-scald device can see a $500 penalty per violation.
Hot water and heat are two of the most important services that a landlord / building owner can provide. While it’s understandable that from time-to-time there will be boiler issues and repairs are warranted, a systematic problem that sees residents out of hot water on a consistent basis is a problem that will need to be resolved.
If you are in a building with a systematic hot water or heat issue, please call 311 (after calling your building management company) to report the building and to have an inspector visit and issue a violation, if needed.